​How to modify system date of my device?
Go to 【Setup】>【System】>【Clock】 and you can modify system time on this page.
Explore more
​Encoding Parameters
Storage Mode: Five storage modes are available
Explore more
​How to set up EZDDNS?
To use EZDDNS, the device must be connected to the internet
Explore more
​How to stream the camera live view via RTSP?
Use VLC to stream camera live view via RTSP URL
Explore more
​How many NVRs can 1 camera be added to?
It depends on how many video streams the camera has.
Explore more
​What is the power supply requirement of Uniarch cameras?
There are two ways to supply power for Uniarch cameras:
Explore more
​What does each encoding parameter mean?
Storage Mode: Five storage modes are available: Main Stream, Sub Stream
Explore more
​How to log into an Uniarch NVR?
Step 1. Connect a monitor to the NVR through a VGA or HDMI cable
Explore more
​How to access into the web interface of a device?
Step 1. Connect your device to the same local network with your PC
Explore more
​How to install plugin (Internet Explorer only)
Step 1. Internet Explorer (9.0 or later version) is recommended for logging into Uniarch products.
Explore more
​What to do when I forget device password
If you forget the login password of your device, please try below instructions
Explore more
​How to find the current device system date?
If there is a monitor connected to NVR, the NVR system date can be found on the monitor
Explore more
FirstPreviousNextLast2/3